The ideal place to use the Swing Car is large open space with smooth and
flat surfaces.
NOTE: indoor use is not recommended for regular swing cars with black
PP wheels, as the wheels may cause damage to flooring. Swing cars with
colored PU wheels can be used both indoor and outdoor.
1. Assemble the swing car as shown on the instruction steps.
2. Sit on the seat, place both feet in the footrests, lean slightly forward and
place both hands on the steering wheel.
3. Move the steering wheel left, then right continously. This will cause the
swing car to move forward.
4. To move faster, lean foward over the steering wheel, and use your whole
upper body to move the steering wheel.
5. To Stop, stop moving the steering wheel back and forth, wait for the car
to slow, then place feet on the ground.
USING THE SWING CAR
If you notice that the steering wheel becomes loose or fails to steer the
swing car, the steering wheel nut may not have been tightened enough.
Remove the cap from the steering wheel with a slotted screwdriver and
loosen the nut with the hex tool. Repeat steps 7 to 10, and tighten the nut
As Tight As Possible.
For video instructions and Support,
Please visit www.JoybaySwingCar.com.
TROUBLESHOOTING
CUSTOMER SUPPORT