Joy Sport Life Fit, Manual

Page: 9 / 34

Ⅶ
OPERATION
1. Switch on power:
Insert three poles plug into socket (note: it must have a complete earthing); and
insert safe key, then switch on power, the monitor will moo, and all data become
zero, here the treadmill is in stop state.
2. Direct start:
Press start key when the treadmill is in stop state and all the data in the LCD
screen are zero, it run at the lowest speed; press fast key, the speed will increase;
press slow key, the speed will decrease.
3. Set start:
At the state of rest, press set key to set time
、
distance
、
pulse
、
auto change
speed,auto incline and hilly country data. At the state of time, distance and pulse
setting, initial data will be shown in relevant window and the radix point winks(for
the 0918TV, the corresponding window winks) , press “
∧
” or “
∨
” of “speed key” to
modify the data, if press “stop” key, all the setting will be concelled, after finish
setting, press“start”, treadmill will run according the setting data; if time and
distance are set for certain data, the data reducing till it comes to zero, at this
time, the machine will moo and begin to count. The pulse settlement works for
speed controlled by pulse, at this time, the aim data is 100 times per minute, the
data of speed is 2.8km/h, press slow and fast key can amend the aim data of
pulse. At this time, press the start key, the data will be confirmed and adjust the
speed according to comparation of the runner‟s pulse and pulse setted, thereby
make the runner‟s actual pulse be kept on the aim data. Note: many factors
influence the testing of pulse, so the testing data is for reference only. The max
speed of this mode is 6km/h, and there is no use of direct speed choice key. The
scale of pulse control speed is from 50 times per minute to 160 times per minute.
4. Pause and stop
0918LCD: During treadmill runs, first press stop key, it‟s paused, the treadmill
stops and keep all data, if here press start key, the treadmill will run as per original
state; if press stop key in second time, all data in the windows will become to zero.
0918TV: During treadmill runs, first press stop key, it‟s paused, the treadmill stops
and keep all data(the speed show 0.8km/h);if here press start key, the treadmill
will continue to run; if press stop key in second time, all data in the windows will
become to zero.