Joy Sport Life Fit, Manual

Page: 8 / 34

Ⅴ
DEBUGGING GUIDE
1 After finish assembling, insert safe key into the corresponding jack.
2 Before start, checking whether the voltage is normal, 3-core cable has a good earth
and pull the running belt to check whether it moves well and if there is exceptional
noise.
3 Switch on the power and then all data in the windows should be zero, the running
belt is at rest state, press start key, the belt will run at lower speed of 0.8km/h,
here observing if every part of treadmill is normal.
4 Press „fast‟ key and „slow‟ key to check whether they are normal.
5.Press „stop‟ key to check whether the machine stop running normally.
Ⅵ
OPERATION ON FOLDING
1 Unfold the mainframe:
On the condition of folding, the mainframe will land slowly under the function of the
hydro cylinder if you spurn the locking apparatus.(look at the arrow in the picture.)
2 Fold the mainframe:
When you need to fold the mainframe, gripe the waling piece in the back of the
mainframe, uplift it until the locking apparatus locks automatically.(Make sure that it
is locked.)
Warning: Please confirm if
the grade is on the 0 position
before folding,if the grade is
not on the 0 position,the
machine is forbiden to be fold.
When folding or opening the
machine,please do not
touch the armrest with
your fingers to avoid
accidentally injury.