1.8“ TFT Display
Published: 08.11.2018
Copyright by Joy-IT
9
The file cmdline.txt must also be adapted:
Add the following command to the end of the existing first line:
Next, the
99
-
fbturbo.conf
file must be modified:
Change the following line...
sodass sie
fb0
in
fb1
ändern. Die Zeile sollte dann wie folgt aussehen:
so that you change
fb0
to
fb1
. The line should look like this:
Add the following two lines to the file:
Another file must now be created:
Insert the following content:
The value rotate=90 allows in our case the rotation of the display by 90°.
You can choose between 0, 90, 180 and 270, which corresponds to the respective degrees.
Now restart your Raspberry Pi with the following command
sudo nano /boot/cmdline.txt
fbcon=map:10
sudo nano /usr/share/X11/xorg.conf.d/99
-
fbturbo.conf
Option "fbdev" "/dev/fb0"
Option "fbdev" "/dev/fb1"
sudo nano /etc/modules
-
load.d/fbtft.conf
spi
-
bcm2835
fbtft_device
sudo nano /etc/modprobe.d/fbtft.conf
options fbtft_device name=sainsmart18 rotate=90
sudo reboot
Summary of Contents for RB-TFT1.8
Page 1: ...1 8 TFT Display 3...
