Jovy Systems® Limited
User Manual
UM1501SLD01
Revision
1.00
Date
August 2015
Page | 5
How to use:
1-
Unpack the
i
Solder-40 and select the
proper voltage range from the voltage
selector (110VAC/60Hz or 220VAC/50Hz).
2-
Place and arrange the
i
Solder-40 with all
other parts in a convenient location in your workspace.
3-
Insert the desired tip into the hand piece to end – fastening click heard – by
using the protective pad, steps as shown in figure 1 and 2. (For more
information about tips see Tip care and selection section and also Hints and
Tricks Section)
Figure 1
Figure 2
