18
Picture 1
Picture 2
WARNING!
Please make sure the new fuse has the same rating as the
old one. The electrical system will be damaged with the wrong rated fuse.
5.2.10 Adjust the tiller assembly
Loosen the knob on the tiller adjuster, hold the tiller lever to a comfortable
angle for driving, then tighten the knob.
(1) Tiller Adjuster (2) Knob (3) Tiller Lever
5.2.11 Freewheel lever on the scooter is located on the rear section of the
scooter. Before driving, the scooter needs to be put into the drive position.
The two positions are:
1. Drive position, which is indicated by “Closed.” Pull the lever backward for
the position [Fig 5.2.11.1].
2. The freewheel position is indicated by “Open.” Push the lever forward for
this position [Fig 5.2.11.2].
USE
