11
9.
TUNER Function
Use an extended press on the (Tuner+) button to activate the tuner function. This is accessible in both
Edit and Preset modes, but when you exit the Tuner you’ll go back to Preset Mode.
•
The center light will illuminate RED
•
The Lights above the Guitar Notes (EADGBE) will automatically detect the string you’re tuning
and light above the note when you are close to the pitch.
•
The lights at the bottom of the panel will move towards the left (AMM, GAIN) when the pitch is
flatter, and towards the right (IR CAB, VOL) when the pitch is sharper.
•
The panel display below shows the low E string (illuminated blue) is in tune as the bottom lights
are centered at (Time and Fb).
•
To Exit Tuner function, press any other button and it will go back to Preset mode
10.
BYPASS Function (Direct Dry Signal)
Extended Press the (Bypass-) button to enter the Bypass mode.
After entering the Bypass mode, the Bypass indicator lights up in blue, and the other module and
indicator lights are all off. In Bypass mode, the output signal of the instrument is a dry signal (through).
To exit the BYPASS function, just press either the (on/off
3
) and (
4
store) button.
11.
Micro-USB to 3.5mm recording jack for
internal recording
Use the provided micro-USB to 3.5mm headphone
jack cable with this data port to record on
compatible devices supporting 3.5mm headphone
jack input for sound recording.
12.
IR Cab Loading
The HA01 can load load third-party IR CAB simulations through the CubeSuite software provided on the
product page on the website. Connect the included USB 2.0 cable to your computer use the CubeSuite
software. This feature will be available in the upcoming months.
©Copyright 2021 Journey Instruments Limited
