joule JPSH01, Quick Start Manual

Page: 6 / 12

6
3. Power on the heater, i.e. plug it into an mains socket with the power cord ❺ . Please do not use an extension cord
to plug it in! Press the power button
❶
. It shall flash green .
4. Activate the device in the mobile app as follows:
a. Connect your smartphone to Wi-Fi (2.4 GHz) and log in to your Perenio Smart Home & Office app account (or
download the mobile app from Google Play or App Store and register a new user account);
b. Click on the “+” icon in the “Devices” tab and select the heater from the list;
c. Allow all requested accesses to the app;
d. Enter the Wi-Fi network password and tap “Connect”;
e. Press and hold the power button of the device until it starts blinking purple;
f. Tap “Start searching” button in the app;
g. Wait till the connection process is completed, and tap “Done”.
NOTE. If you failed to connect the device, please perform reset to factory settings and repeat the process.
NOTE. You may also activate the device in Yandex Smart Home or Amazon Alexa
4
, if required.
5. Set timers or operating scenarios in the mobile application, as may be required, or control the device manually
(See complete user manual
3
).
Child Lock Mode
The Child Lock mode means locking the power button of the device via the mobile app. If this mode is activated, the
heater will beep every time its power button is pressed. The button itself will be locked and inactive.
There are two following ways to disable the Child Lock mode:
1. Remotely via the
Perenio Smart Home & Office app.
2. Manually by pressing the power button 5 times for 4 seconds.
SAFE OPERATION RULES
ATTENTION! Hot surface!
The risk of burns in the case of contact with heated surfaces! Do not touch the heating
panel until completely cooled down!
The power cable must never be in contact with the heat-emitting panel!
The device is not designed for ceiling installation.
Neither cover the heater nor dry things on it. Do not mount the device directly below/above the mains socket. Do not
use the device, if its glass panels are damaged. Protect the device from water and mechanical damage. Do not install
it in areas accessible to children and pets. Do not move or touch the device when it is on or hot.
ATTENTION! It is also strongly recommended to place/mount the heater at a distance of at least 1 meter from any
fabrics, furniture, decorations and any other flammable materials in order to prevent from the risk of combustion due
to high flammability of such materials. Violating these recommendations is done on the risk of the user, and the
manufacturer shall not be liable for any damages caused by such violation.
ATTENTION! If the device is damaged due to tilting or falling, this will void the manufacturer’s warranty.
TROUBLESHOOTING
1.
The heater does not heat up when turned on: The desired temperature was set incorrectly. Please set the desired
temperature higher than the current one.
2. The heater does not respond to commands from the mobile app: The network connection failure occurred. Please
reconnect the device to the Wi-Fi network.
3. During operation, the heater beeps, and the LED indicator is blinking red: The heater is tilted dangerously. Please
return the heater to an upright position.
These symbols indicate that you must follow the Waste Electrical and Electronic Equipment (WEEE) and Waste Battery
and Battery Regulations when disposing of the device, its batteries and accumulators, and its electrical and electronic
accessories. According to the rules, this equipment must be disposed of separately at the end of its service life. Do not
dispose of the device, its batteries and accumulators, or its electrical and electronic accessories together with unsorted
municipal waste, as this will harm the environment. To dispose of this equipment, it must be returned to the point of sale or
turned in to a local recycling facility. You should contact your local household waste disposal service for details.
1
Some components, accessories, and/or functions may not be present in your heater configuration. See the box or product page at jouleeco.eu .
2
The device is intended for indoor installation. Operating conditions: 0°C to +40°C, up to 85% RH (non-condensing). See date of
manufacture on the package.
3
All information contained herein is subject to amendments without prior notification of the User. For current information and details on
the device description and specification, connection process, certificates, warranty and quality issues, as well as the Perenio Smart
Home & Office app functionality, see relevant Installation and Operation Manuals available for downloading at jouleeco.eu .
Manufacturer: Joule Production SIA, Bauskas iela 58a-15, Riga, LV-1004, Latvia. Made in EU. All trademarks and names herein are
the property of their respective owners.
4
For some third-party applications, the device must be first activated in the Perenio app.