Jøtul PF 710, Installation, Operation And Maintenance Manual, Page: 5 / 76

5
ENGLISH
Follow the routine and extraordinary maintenance
schedule carefully.
Do not use the appliance without having first carried out
daily cleaning.
Do not use the appliance if operation is abnormal, you
suspect a breakage or if there are unusual noises.
In case of failure or malfunction, turn the appliance off
and immediately contact your specialised technician.
Do not throw water on the appliance in operation or to
extinguish the fire in the burn pot.
Do not switch the appliance off by disconnecting the
mains electrical connection.
Do not lean on open doors, this could compromise the
stability of the appliance.
Do not use the appliance as an anchor support of any
kind.
It is prohibited to use the product as a ladder or support
structure.
Do not clean the appliance until the structure and ashes
have completely cooled.
Only touch the door when the appliance is cold.
In case of flue gas leaks in the room or explosions
detrimental to the device, turn it off, ventilate the room
and immediately contact your installer/service technician.
In case of fire in the chimney flue, turn the appliance off,
disconnect it from the power supply and do not open the
door. Then call the competent authorities.
In case of failure of the ignition system, do not ignite the
appliance with flammable materials.
In electrically powered devices, if unburned gas/fumes
accumulate inside the fire box, do not disconnect the
electrical power supply and move as far away from the
appliance as possible. In case of malfunction of the
appliance due to a poor flue draught, clean the flue in
accordance with the procedure described in section
“Maintenance”.
Do not touch the painted parts during operation to avoid
damage to the paintwork.
All responsibility for improper use of the product is fully
borne by the user, who relieves the manufacturer of any
civil and criminal liability.
It is prohibited to operate the appliance with the door
open�
It is prohibited to use the appliance if the door glass or
gaskets are damaged.
Any type of unauthorised handling or replacement with
non-original spare parts shall place the safety of the
operator at risk and relieve the manufacturer of any civil
and criminal liability.
It is prohibited to manually load pellets into the burn
pot; this type of incorrect behaviour may generate an
abnormal amount of unburned gas, giving rise to the risk
of explosion inside the chamber�
Unburned pellet deposits in the burn pot after a failed
ignition must be removed before making a new ignition
attempt.
If the burn pot is not cleaned and regularly serviced,
malfunctions and explosions may occur inside the
appliance. Be sure to remove all traces of material and
deposits from the holes of the burn pot and to clean them
each time the ash is emptied or after each failed ignition
attempt. Make sure the burn pot holes don’t decrease
in size as this may have a negative effect on the safe
operation of the appliance.
Do not wash the product with water. Water may infiltrate
the unit and damage the electrical insulation, causing
electric shocks.
2�2 WARNINGS FOR TECHNICAL
MAINTENANCE PERSONNEL
Maintenance operations must be carried out only by
authorised and qualified personnel.
Observe the prescriptions contained in this manual.
Always use personal protective equipment and other
means of protection.
Before starting any maintenance work ensure that the
appliance, if it has been used, has cooled down.
Even if only one of the safety devices is not working, the
appliance is to be considered not working.
Disconnect the appliance from the electrical mains
before performing any type of maintenance works.
Disconnect the appliance from the electrical mains before
working on electrical and electronic parts, connectors and
moving parts (pellet loading systems, automatic burn pot
cleaning systems, etc.).
2�3 WARNINGS FOR USERS
To ensure correct use of the product and electronic
appliances connected thereto and to prevent accidents,
it is important to always follow the instructions provided
in this manual.
The outer surface of the appliance presents several
particularly hot parts (door, handle, glass, flue gas pipes,
etc.).
Contact with these parts must therefore be avoided
unless wearing suitable protective clothing or equipment,
such as heat resistant gloves or in the presence of “cold
handle” operating systems.
For this reason, maximum caution is recommended
during operation and in particular:
Do not touch and do not get close to the glass of the fire
box door, it could cause burns, do not look at the flame
for a long time�
Do not hang laundry directly over the appliance for drying:
fire hazard�
• do not touch the smoke outlet;
• do not perform any type of cleaning;
• do not offload the ashes;
• do not open the fire box door;
• do not open the ash drawer (where provided)�
The appliance can not be used by children under the age
of 8 and by people with reduced physical, sensory or
mental abilities, or without experience or the necessary
knowledge, unless they are under supervision or after
they have received instructions relating to the safe use of
the appliance and to understanding the inherent dangers.
Children must not play with the appliance. Cleaning for
which the user is responsible must not be carried out by
unsupervised children.
Before performing any type of operation, the user or
whoever is operating the product must have read and
fully understood the contents of this installation and
use manual. Errors or bad settings may cause hazardous
conditions and/or irregular operation.
Unskilled users must be protected from access to any
part that could expose them to danger. Therefore, they
must not be allowed to intervene on internal parts at risk
(electrical or mechanical), even if the disconnection of
the power supply is required.
Respect the instructions and warnings highlighted on the
sign plates displayed on the appliance.
The sign plates are accident prevention devices, therefore
they must always be perfectly legible. If these are
damaged and unreadable, it is mandatory to replace
them, requesting the original spare parts from the
Manufacturer.