Jøtul GF 300 BV Installation And Operation Instructions Manual Download Page 2

2

137945_Rev_F   7.29.10

 

Suggested Tools for  

Installation and Service

•  External regulator (for Propane only)

•  Piping which complies with local code

•  Manual shut-off valve -  

  T-Handle required in Massachusetts

•  Sediment trap - if required by code

•  Tee joint

•  Pipe wrench

•  Pipe sealant

•  10 mm open end wrench

•  1/2”, 7/16” open end wrench

•  Phillips head screwdriver

•  Flat head screwdriver

•  1/4” nut driver

•  Gloves

•  Safety glasses

•  Torx T-20 screwdriver 

THIS OWNER’S MANUAL PROVIDES INFORMATION TO 

ENSURE SAFE INSTALLATION AND EFFICIENT, DEPENDABLE 

OPERATION OF YOUR FIREPLACE INSERT. PLEASE READ 

THESE INSTRUCTIONS IN THEIR ENTIRETY AND MAKE THEM 

AVAILABLE TO ANYONE USING OR SERVICING THIS GAS INSERT.
DO NOT ATTEMPT TO ALTER OR MODIFY THE CONSTRUCTION 

OF THIS APPLIANCE OR ITS COMPONENTS.  ANY 

MODIFICATION OR ALTERATION WILL VOID THE WARRANTY, 

CERTIFICATION AND LISTING OF THIS APPLIANCE.

 �

We recommend that 

our gas products be 

installed and serviced by 

professionals who are 

certified in the U.S. by 

the National Fireplace 

Institute® (NFI) as NFI Gas 

Specialists.

THIS PRODUCT MUST BE INSTALLED BY 

A LICENSED MASTER OR JOURNEYMAN 

PLUMBER OR GAS-FITTER WHEN 

INSTALLED IN THE COMMONWEALTH OF 

MASSACHUSETTS.

Your stove has a unique serial number stamped on the 

rating plate which is hung on the back. Please record 

the serial number in the space below. You may also wish 

to attach your purchase receipt to this page for future 

reference.

MODEL NAME:   Jøtul GF 300 BV Gas Stove

SERIAL NUMBER:_______________________________

 

DATE OF PURCHASE:____________________________

AUTHORIZED DEALER:__________________________ 

 

   ADDRESS ___________________________________ 

 

   PHONE: ____________________________________

   INSTALLER:__________________________________

 

FUEL TYPE:____________________________________

FUEL CONVERSION:                  NO _______       YES_____

NOTES:________________________________________

______________________________________________

______________________________________________

______________________________________________

67.5%

Jøtul GF 300 BV

Summary of Contents for GF 300 BV





























Reviews: