11
1.0 Relationship to the
authorities
The Jøtul FS 380 concept
is a serial of freestanding products that
uses the Jøtul F 370
as the burn chamber and can be positioned
against inflammable walls at the distances described in
fig. 1
.
The installation of a fireplace must be carried out in compliance
with national laws and regulations. All local ordinances must be
observed when installing this product.
Contact your local building authorities regarding restrictions and
installation requirements. The product may not be used until it
has been inspected and approved by qualified personnel.
The surround comes with an Installation Manual that contains
technical data for the whole fireplace. The insert comes with an
Installation Manual that contains technical data for the insert
(see*). For day-to-day use, maintenance, service work, etc., please
refer to the General Use and Maintenance Manual.
* The Installation Manual for the Jøtul FS 380 concept must be
followed precisely with regard to the installation requirements
and information described in
fig. 1
and in
«2.0 Technical Data»
.
The product is documented as a freestanding product in
accordance with EN 13240.
The approval label for the freestanding product comes with the
Installation Manual for the surround. It should be affixed in a
suitably visible place.
2.0 Technical data
The surround is available in the following options:
Black paint and brushed steel.
Weight, surround, ca:
45 kg
Weight, burn chamber, ca.:
120 kg
Flue pipe dimension:
Ø 150 mm/177 cm
2
cross section
Height:
1777 mm
Width:
473 mm
Depth:
488 mm
Minimum distance to ceiling:
600 mm
Height, centre smoke outlet, rear,
ca.:
1425 mm
Connection height,
ca.:
1223 mm
Location of external air supply:
See fig. 1
Optional extras:
See pkt. 6.0
Technical data in acc. with EN 13240
Nominal heat output:
5,5 kW
Flue gas mass flow:
5,9 g/s
Recommended chimney draught: 12 Pa
Efficiency:
73 % @ 5,8 kW
CO emissions (13% O
2
):
0,12 %
Flue gas temperature:
330
o
C
Operational type:
Intermittent
«Intermittent combustion» here means normal use of a fireplace,
i.e. to continue producing heat, add more fuel as soon as the
previous load of wood has burnt down to embers.
eNglish
Installation manual with technical data
1.0 Relationship to the authorities .....................11
2.0 Technical data ................................................11
3.0 Before installation ........................................ 12
4.0 Installation ................................................... 12
5.0 Installation completed ................................. 13
6.0 Optional Equipment ..................................... 13
Figures .....................................................................14
Summary of Contents for FS 381
