Jøtul FS 166-1570, Installation And Operating Instructions Manual

Page: 43 / 84

43
Fig. 6
1.
A
B
Mount the four cassette legs
(Fig. 6 A)
.
2. Screw the foot screws
(Fig. 6 B)
through the foot. Adjust
lenght to approx. 15 mm
(see Fig. 1 and Fig. 13)
.
3. Stand the product carefully up.
4. Reposition the previously removed heat shield (see Fig. 5) .
Fig. 7
A
B
1. Unscrew the upper heat shield at the rear
(Fig. 7 A)
. Turn it
upside down and screw it firmly in position using the same
screws it was fastened with before.
2. If top smoke outlet
: Mount the heat shield for flue pipe
(Fig. 7 B) .
Fig. 8 A
NB! Hole in floor for external air.
Fig. 8 B
1.
D
A
E
B
C
50 mm
Assemble the stand. The stand consist of bottom plate (Fig.
8 B-A)
, 4 legs
(Fig. 8 B-B)
and top plate
(Fig. 8 B-C)
.
2. It is very important that the legs are mounted as shown in
figure 8 B-D
.
3. Place the stand at its final position and make sure a gap of
min. 50 mm to the wall.
4. The floor and stand has to be completely level
(Fig. 8 B-E)
.
This is extremely important to ensure that the rest of the
installation is correct.
ENGLISH