Jøtul FS 165 - I 400 FL, Installation And Operating Instructions Manual

Page: 46 / 100

46
Fig. 12
1. Position the burn chamber on the stand. Make sure that the
burn chamber is positioned stably.
2. Attach the External air connection (cat. no. 341279) if this
is selected
.
Fig. 13
A
C
B
1. Replace the heat shield
(Fig. 13 A)
.
2. Use the accompanying threaded pins and nuts
(Fig. 13 B)
as a
replacement for M8x16mm which was removed (see Fig. 5 A) .
3. Remove the 3 tapping screws and turn the upper heat shield
upside down
(Fig. 13 C).
Fig. 14
A
B
1. Mount the first rear plate to
bracket 6
that is placed under
the first layer of soap stone.
2. Mount
bracket 3
from the inside through the back plate
(Fig.
14 A) . Use a hammer and knock it gently into the soap stone.
3. Place the side stones of the second layer between the corner
stones and the rear plate. Use
bracket 3
to hold it in place
(Fig. 14 B)
.
4. Make sure everything is level.
Fig. 15
A
B
1. Attach the decorative frame
(Fig. 15 A)
to the burn chamber
using the threaded pins and nuts mounted in
figure 13 B
.
2. The position of the frame can be adjusted with the nuts
(Fig. 15 B).
ENGLISH