17
4.8 Performance check
Always check the control handles once the product has been
assembled. These should move easily and work in a satisfactory
manner.
Fig. 26 - 1
The Jøtul F
470
is equipped with the following operating options:
Air vent (Fig. 26 - 1 A)
Pushed in:
Closed
Pulled out completely:
Open
If the valve is difficult to pull out, see
step 4.6.
Ignition vent (Fig. 26 - 1 B)
Pushed in:
Closed
Pulled out completely:
Open
If the valve is difficult to pull out, see
step 4.6.
Riddling grate (Fig. 26 - 1 B)
(same handle as for the ignition vent).
Right-hand handle pulls in and out
Handle (Fig. 26 - 1 C)
for door
Opens by pulling the handle all the way out and then raising
the door.
Stack height (Fig. 26 - 1D)
for firewood
(the firewood must not
cover the holes)
.
If the weights touch the side plates and the bearings make a
noise when the door is raised, move the side plates out slightly.
See
step 4.4.
4.9 Location of approval label
The approval label must always be affixed to the wire and
positioned as illustrated in
Fig. 26 - 2 A.
Fig. 26 - 2, Base
Fig. 26 - 2, Pedestal
Fig. 26 - 2, Foot
NB!
Note that, on the foot, the approval label A must be pushed
in onto the clip B with the text turned downwards
.
ENGLISH
Summary of Contents for F 471
Page 117: ...117 ...
Page 118: ...118 ...
