jotron Tron 45S, User Manual

Page: 23 / 36

98955_UM_ 45S/SX_E 23
1. Unscrew the ring.
2. Separate the two parts of the housing.
3. Disconnect the battery connector.
4. Check that the new battery is marked with date of expiration.
5. Place the new gasket on the battery housing.
6. Connect the battery connector.
7. Replace the upper part, taking care that the gasket is correctly fitted.
8. Replace the screw ring.
9. Perform a Self-test.
6.1.3 BATTERY DISPOSAL
Dispose in accordance with applicable regulations, which vary from country to country.(In most countries, the thrashing
of used batteries is forbidden and the end-users are invited to dispose of them properly, eventually through non-profit
organizations, mandated by local governments or organized on a voluntary basis by professionals).Lithium batteries
should have their terminals insulated prior to disposal.
6.1.4 INCINERATION
Incineration should never be performed by battery users but eventually by trained professionals in authorized facilities
with proper gas and fumes treatment.
6.1.5 LAND FILLING
Leachability regulations (mg/l)
Component Leachability EC
limit
EPA Other*
Iron
Nickel 100
100
500
2 5
0,5
* Applicable to France
6.1.6 RECYCLING
Send to authorized recycling facilities, eventually through a licensed waste carrier.
6.2 TRON 45S/SX SELF TEST
1. Remove the EPIRB from the bracket.
2.
Press the spring-loaded switch on top of the EPIRB to “TEST” position.
Keep hands and objects away from the antenna.