jotron Tron 40GPS Mk II, User Manual

Page: 28 / 40

28 82823_UM_ 40GPSMkII_E
6. Fit a new gasket on top of the battery module and reconnect the 6-pin connector, be sure that the
connector is fitted properly. A noticeable «click» should be heard when the connector is in place.
7. Please make sure that the enclosed silica-gel bag is fastened inside the emergency product, with
the supplied strips into/between holes in the black cover.
IMPORTANT: Cut the strips p/n 96898 after mounting of silica gel to avoid the strips to come
between rubber gasket and top housing.
8. Please also fit the enclosed anti corrosion adhesive tape to the inside of the battery before
assembling the unit.
9. Orientate the two halves of the EPIRB the following way:
An orientation tab is fitted on both halves of the EPIRB, these tabs must be placed carefully on top
of each other.
10. Make sure that the gasket is properly in place, and replace the equator ring using a special tool to
tighten it together.
11. Replace the U-shaped bolt and a new split pin to secure the bolt in the equator ring.
12. Remount EPIRB in its bracket.
6.1.3 BATTERY DISPOSAL
Dispose in accordance with applicable regulations, which vary from country to country.(In most countries,
the thrashing of used batteries is forbidden and the end-users are invited to dispose of them properly,
eventually through non-profit organizations, mandated by local governments or organized on a voluntary
basis by professionals).Lithium batteries should have their terminals insulated prior to disposal.
6.1.4 INCINERATION
Incineration should never be performed by battery users but eventually by trained professionals in
authorized facilities with proper gas and fumes treatment.