82823_UM_ 40GPSMkII_E
25
4.1.4
MOUNTING THE FB5/MB5/FB4/FBH4/MB4 BRACKETS
See figure 7.8
The bracket is mounted with 4x6mm bolts according to the drawing. Use the bolts supplied with the
bracket. The bracket could be mounted in either a vertical or horizontal position, whichever is the best
regarding maintenance and operation.
5
OPERATION INSTRUCTIONS
The Tron 40GPS MkII is designed to be operated either manually or automatically. The EPIRB is
always armed, that is the EPIRB will automatically start to transmit when the EPIRB is out of the
bracket and deployed into water. In the lower part of the EPIRB there is an automatic safety switch.
This switch prevents the seawater contacts from operating the EPIRB (caused by ice, sea-spray etc.) as
long as the EPIRB is placed in its bracket. See chapter 6.5 Error codes.
5.1
MANUAL OPERATION
See figure 1.1
WARNING!
USE ONLY DURING SITUATIONS OF GRAVE AND IMMINENT DANGER
For operation of the beacon in the bracket please follow instructions 1 to 3.
To manually remove the beacon from the bracket, pull out the locking pin on the clamp and open the
retaining rod that holds the beacon.
Tie the beacon lanyard to you or to the survival craft and then follow instructions 1 to 6, or put beacon
in the water to activate it.
It is not recommended to operate the beacon inside a life raft or under a cover or canopy. Do NOT tie
the lanyard to the ship in distress, as this will prevent the unit to functioning if the ship sinks.
1.
Break the seal and pull the locking pin holding the main activator switch.
2.
Push slider to move switch to ON position.
3.
The switch is spring-loaded and will automatically go to the ON position.
4.
The strobe light, located at the top of the EPIRB, will start flashing indicating that the
EPIRB is operating.
5.
If possible keep the EPIRB in an open area, away from any metal objects (ship
construction etc.) that may limit the satellite coverage.
6.
Transmission can be stopped by turning the switch to READY position.
Summary of Contents for Tron 40GPS Mk II
