Joto E-HP-JMP-1S2E Operator'S Manual Download Page 2

2

www.jotoimagingsupplies.com 1-800-565-5686 Blaine, WA | Las Vegas, NV | Antioch TN | Coquitlam, BC | Brampton, ON

Safety Instructions

For Use By Qualified Personnel Only

When using your Mug Press,

basic precautions should always be followed,

including the following:

Read all instructions.

Use mug press only for its intended use.

Always keep the mug press dry.  Do not get the mug press wet to reduce the risk of electric shock.  

Avoid storing mug press in a wet/ damp area.  

Never pull the cord to disconnect the power. Instead, grasp plug and pull to disconnect from power 

outlet.

Make sure you protect the power cord by keeping it away from hot surfaces. Avoid placing objects 

on top of the cord.  This could cause damage to the cord and could be a fire hazard risk. 

Do not operate mug press with a damaged cord or if the equipment has been damaged.  To prevent 

risks of injury, please do not disassemble or attempt to repair the mug press by yourself if you are 

not qualify to do so. Instead, call or take it to a qualified service person for examination and repair. 

Incorrect assembly or repair could increase the risk of fire, electric shock, or injury to persons when 

the equipment is used.

If mug press being used by or near children, please make sure that it is supervised. Do not leave 

equipment unattended while connected.

Metal parts on the press can become hot.  Avoid touching the hot metal parts to prevent burns.  

Proceed with caution when using the mug press.

To reduce the likelihood of circuit overload, Joto recommends to use a dedicated circuit if possible.

Make sure that the cord is safely secured so it cannot be pulled or tripped over. 

If you need to use an extension cord, make sure you use a 20 amperage rated cord. Cords rated 

below 20 amperage can overheat. Make sure that the extension cord  is safely secured so it cannot 

be pulled or tripped over. 

Note:  Temperature is in Fahrenheit or Celsius.  This mug press should not be set to exceed 

400

˚

F (200

˚

C).  Setting the press temperature to above 400

˚

F(200

˚

C) will burn out your mug 

element and may cause a fire hazard.
Do not use any other power cords other than the one provided with this machine.  

 

Doing so may result in a fire hazard.  If you need a replacement cord, please call Joto at 

 

1800-565-5686 to request one.

 

PLEASE KEEP THE BOX THAT YOUR MUG PRESS ARRIVED IN, 

 

ALONG WITH ALL ORIGINAL PACKAGING.

Summary of Contents for E-HP-JMP-1S2E

















Reviews: