11
www.jotoimagingsupplies.com 1-800-565-5686 Blaine, WA | Las Vegas, NV | Antioch TN | Coquitlam, BC | Brampton, ON
Maintenance
General Maintenance
Please switch off the machine and unplug the power cord when the machine is not in use.
To protect the heat platen, do not allow any hard surface objects to be in direct contact with
the platen. This includes zippers, buttons, metal sublimation items. When pressing these
items, place a protective sheet between the platen and the objects.
The heat-releasing fan will automatically starts when the temperature of heat platen reaches 80
degree C (176 degree F). It helps to reduce the temperature of electrical parts and prolong the
service life of them.
Heat platen may pivot slightly back and forth. This is due to movement allowance within the
clamp assembly, and is normal.
Please add the lubrication oil regularly on the joints to prolong the life of your heat press. The
frequency will depend on how often you use your machine.
When changing parts, turn off the power, To ensure the accuracy of GY-06 controller, rest time
and temperature.
Note: This heat press should not be set to exceed 400˚F (200˚C). Setting the press
temperature to above 400˚F (200˚C) may cause a fire hazard.
If your heat press stops working, please contact Joto at
1-800-565-5686 so we can help you troubleshoot.
