JEB19 SAFETY INFORMATION
Ed.: 2019-R0
21
6. PREPARATIONS FOR YOUR USE
Check the bicycle and its components before using it. Remember that if you detect a
problem on your bike, in case you can not repair it, you have to take it to your authorized
dealer.
Do not use the bicycle after detecting abnormal operation or at the slightest sign of failure.
WHEELS
ALIGNMENT
Turn each wheel and watch the rim pass without jumping through the fork and
swingarm, and that the brake discs do not push the brake pads. If the tire’s rotation
is not uniform, take your bicycle to your authorized dealer.
FIXING
For safer driving, the wheels of your bike must be firmly attached to the fork and
swingarm. The front wheel is connected by two screw. The rear wheel is equipped
with a tightening by eccentric tank.
INFLATION PRESSURE
Inflate the tires with the recommended air pressure on the side of the tires. Also take
into account the weight of the cyclist. High pressure provides better performance on
hard surfaces such as asphalt, while low pressures are better for off roads.
BRAKES
This bicycle is equipped with hydraulically operated disc brakes on both wheels.
If you detect a lack of efficiency in the brakes go to an authorized dealer.
The handle located on the right side of the handlebar activates the rear brake and the
handle located on the left side of the handlebar actuates the front brake, unless the
legislation of the country requires it in reverse.
Ensure proper operation of the front and rear brakes.
The brake discs can only be cleaned with water. Remove dirt and mud before using the
bicycle.
In case of detecting scratches, cracks or deformations in the brake discs, consult your
authorized dealer.
MANILLAR Y POTENCIA
Make sure the power and handlebar are correctly positioned and tightened.
Carefully inspect the handlebar and power for signs of fatigue: scratches, cracks, dents,
deformations or discolorations. If any part shows possible fatigue damage, replace it
