5
Structure
5.2
Control elements
The control elements consist of two buttons that are mounted in
the standard console or a universal bracket. The landing gear can
be operated both in momentary-contact operation and in auto-
matic mode. Pressing the top button (1) causes the landing gear to
be retracted, and pressing the bottom button (2) extends it.
ADVICE!
Momentary-contact operation: the landing gear only
moves when the buttons are pressed. Movement stops
immediately when the button is released. Movement
of the landing gear stops automatically when contact is
made with the ground, or when it is fully retracted.
Automatic mode: the landing gear moves until it makes
contact with the ground or is fully retracted, and then
the movement stops automatically. During movement,
the landing gear can be stopped at any time by pressing
any button.
When the limit position is reached, the motor is briefly
run opposite to the previous movement direction so as
to avoid wind-up in the landing gear.
ATTENTION!
Note that the landing gear is not allowed to be used for
lifting trailers in conjunction with the electric drive. The
landing gear stops when it encounters resistance from
the ground, the height can then be compensated man-
ually using the crank in order to achieve the correct sup-
port position.
16
MUB 006 001 M01
(REV-D)
07-2020
Modul E-Drive
