5
Operation
5.1
Operating equipment
JSK-ST/20
1
6
2
3
5
4
1 Crank
3 Low gear
5 Lower
2 High gear
4 Raise
6 Landing gear
foot
ATTENTION!
When you have finished turning the crank handle,
slowly take the strain off the crank. There is a risk of the
crank recoiling.
High gear (2):
To lower and retract the landing gear quickly
and to bridge ground clearance.
Low gear (3):
To raise and lower the laden and unladen
trailer.
Gear change
High gear (2):
Remove the crank from the parking hook and
pull it out fully until the gear engages. A slight
turning motion facilitates the gear change.
The gear locking mechanism must engage.
Low gear (3):
Remove the crank from the parking hook and
push it in fully until the gear engages. Finally,
hang the crank in the crank holder. A slight
turning motion facilitates the gear change.
The gear locking mechanism must engage.
EN
Modul B & OPTIMA
MUB 006 003 M01
(REV-A)
07-2020
9
