jost 613403, User Manual

Page: 58 / 92

4 Messages
An explanation of the messages that may be displayed on the remote control’s screen is
given below.
4.1 Types of messages
The messages that can be displayed on the screen during operation can be divided into
three different categories.
n
Information messages:
These messages indicate which processes are running.
n
Warning messages:
These messages indicate problems in the EF-S system which
must be rectified as quickly as possible by the service work-
shop. They can be deleted from the screen by pressing the
button. The orange warning light is lit until the problem has
been rectified.
n
Error messages:
These messages indicate problems in the EF-S system which
must be rectified immediately by the service workshop. These
messages
(see Figure 4-1)
cannot be deleted from the screen.
Figure 4-1
If an error message is displayed on the screen, restart the system. Doing so sometimes
deletes the message. The EF-S system can be restarted in three different ways:
n
Using the button on the remote control. The button is only active if an error
message
(see Figure 4-1)
is displayed on the screen.
n
Using the main switch on the generator box. This turns off the power supply.
n
By rotating the ignition switch to the “0” position. Allow the system to shut down
and then restart it.
Part no.: 162014 EN-1
54
Release 07/2020
User manual 2300 EF-S system