- 3 -
Introduction
Thank you for choose our company product Infusion Pump. Please carefully read and understand this
manual before use. Regularly check and maintain the pump to avoid possible injury or risks.
Safety Tips
1. Infusion Pump is not explosion proof type or portable device.
2. Infusion Pump cannot be used in the condition with mixed gases of flammable anesthetic gases,
oxygen, or ammonia.
3. Infusion Pump can only be used by professional. Patients are not allowed to use.
4. Prevent patients from excessive or insufficient flow induced injury by the following methods: set
infusion parameters correctly, use the calibrated infusion device.
5. If there is any anomaly, suspend using should be taken as the preferred safety measure.
6. To avoid malfunction, keep the device away from strong electromagnetic source or noise when using,
such as NMR equipment, microwave generating devices, radiation equipment (X-ray, CT, etc).
7. To avoid malfunction, keep this device away from the high-frequency surgical instruments (such as
rack, cable, electrode feeder plates, etc.), the distance should be at least 25cm; at least 1m away from
the cell phone.
8. Do not use other voltages. Only use the specified voltages on nameplate of Infusion Pump, or may
cause damage or fire.
9. Do not throw batteries into fire or heat them, otherwise it will result in electrolyte leakage, fire, or
explosion.
10. Do not tear up the shell of batteries; otherwise it will cause an explosion or chemical burn hazard.
11. When plugging or unplugging the AC power, grip the plug firmly. Do not touch it with wet hands.
12. It is not recommended to share an outlet with other electrical equipments.
13. Never disassemble or modify the device arbitrarily.
14. Check the device daily. If not used for a long time, be sure that the functions are normal before
re-use.
15. If any anomaly or function loss, discontinue use and contact the supplier in a timely manner.
Otherwise the user shall take sole responsibility for any consequences.
16. Avoid vibration, bumps, direct sunlight or strong light.
17. Avoid direct contact with blowing hot, wet air from heating, electric stove or humidifier.
18. Avoid using the device in the following places: chemical storage place, dusty place,
vibration/shaking and damp places.
19. Infusion pump is class IIb in electrical safety classification. When in doubt in wiring the protective
earth conductor, it must be operated by the internal power supply.
20. Infusion pump cannot be used in parallel with other brands of pumps.
21. The alarm sound pressure range of the pump is 47-71 db, and the noise in the operating
environment cannot exceed 60 db.
22. Strictly in accordance with User’s Manual of infusion pump in use and maintenance.
23. Infusion pump using infrared drop sensor, does not apply to dark infusion tubing.
