9
ADDITIONAL INSTALLATION INSTRUCTIONS
Each condensate
draining point should
have its own drain.
Do not use one drain for
multiple draining points.
Use one drain for
each individual
draining point.
Avoid water pockets
when installing the feed
pipe, this will create an
air lock.
The ½” feed pipe
must be horizontal or
ideally at a downwards
slope (>1°).
If the downwards slope
of the feed pipe is not
sufficient, or if any other
flow problem occurs, a
venting line must be
Installed to prevent an
air lock.
We advise to apply a
½“ pipe diameter drain
pipe, ½“ elbows and a
½” venting line to
avoid an air lock.
>1°