Joovy Twin Roo+, Owner'S Manual

Page: 4 / 16

EN FR ES
!
WARNING
Always make sure the child is properly buckled into the infant car seat. Use of the stroller with two infants in their
infant car seats weighing more than 40 lbs(18.14 kg) each or two infants totaling more than 80 lbs (36.29 kg) will
cause excessive wear and stress on the stroller and may cause a hazardous unstable condition.
IMPORTANT NOTE
The following are the compatible infant car seat models that the Twin Roo+ will accommodate.
For the most updated list of compatible infant car seats, please check our website at www.joovy.com.
Adapters for specific brands of infant car seats are sold separately.
• Graco® Click Connect
• UPPAbaby® MESA
• Britax®/BOB® B-Safe
8 Removing Infant Car Seat Adapters
• Remove infant car seats from the stroller.
• To remove the UPPAbaby® MESA and Britax® B-Safe/BOB® B-Safe car seat adapters pull up on the release tabs found on the outside of
the adapters and pull the adapters up. See Figure 8.1 .
• To remove the Graco® Click Connect car seat adapters pull the tabs found on the outside of the adapters and pull up on the adapters.
See Figure 8.2 .
NOTE: You DO NOT need to remove infant car seat adapters to fold product
9 Installing the Parent Tray
• Position the two hooks on the parent tray so that they fit over the rear frame bar below the handle bar. Align the holes of the parent tray
with the push pins on the frame bar and be sure these pins pop into the holes on both hooks. Check to be sure the tray is secure.
See Figure 9.1 .
10 Storage Basket
• The maximum weight that can be carried in the storage basket is 10 lbs (4.54 kg).
11 Folding the Product
• Keep children away from stroller while folding.
• Remove any infant car seat. The stroller can be folded with the infant car seat adapter in place.
• Lock BOTH front wheel sets in place with locking levers facing forward.
• On the handlebar, first push the button on the top of the handlebar to the left. Hold it while squeezing the button under the handlebar.
See Figure 11.1 .
• Continue to hold these buttons and push forward on the handlebar until the stroller is completely folded. See Figure 11.2 .
CAUTION: While folding the stroller, be careful to keep your fingers from being pinched by moving parts.
• Engage the fold lock on the right side of the stroller over the extended rivet. See Figure 11.3 .
!
WARNING
ALWAYS keep children away from the stroller when folding.
Possible pinching hazard - Be careful when folding the stroller.
Maintenance
All of the fittings, snaps, locks, rivets, and other hardware and plastic parts on the stroller should be inspected periodically to ensure that
they are secured properly and not damaged or malfunctioning. All moving parts, such as wheels, brakes, and hinges should also be checked
periodically to ensure they are operating properly.
Any missing, broken, or worn components should be replaced immediately, and the stroller should not be used until they are replaced. Only
original manufacturer’s components should be used. If needed, please contact Joovy at our toll-free phone number.
Cleaning
The fabric material on this stroller can be cleaned using mild household soap or detergent and warm water on a sponge or clean cloth.
Always allow the fabric to completely air dry before using the stroller.
The frame and wheels should always be kept clean and free of dirt and foreign matter, especially after operating the stroller in rain, snow, or
other harsh environments. Use a sponge or cloth dampened with warm water and a mild detergent cleaner to clean the wheels after such
use.