Joovy Qool, Manual

Page: 6 / 76

6
Assembly and Usage
• Discard all packaging materials properly. Do not allow children to play with them.
• To assemble the bassinet, remove the mattress and unfasten the Velcro within. (1)
• With one hand braced against the bottom of the bassinet, use your free hand to firmly pull the loop
on the bassinet bracket until the bracket fits into the grooves at the bottom of the bassinet. (2)
Repeat on the other side. The bassinet should now hold its shape.
• NOTE: You may need to unzip the bassinet cover for easier access to the other side.
• Replace the mattress. Rezip the bassinet cover if you have unzipped it.
• Attach the bassinet handle by sliding both posts into the mounts on the bassinet. (3)
• Attach the canopy’s brackets to the sides of the bassinet frame by hooking them into place. (4)
Locate the side zipper and zip the canopy to the bassinet fabric. (5)
• Zip up the bassinet cover. (6) Attach the Velcro of the bassinet cover to the bassinet frame. (7)
• The bassinet can be placed on the stroller forward-facing or rear-facing.
• To use the bassinet in the rear (higher) or middle (lower) position, first ensure the stroller seat is
removed.
• Place the seat brackets at the desired height. Place the bassinet on the stroller so that the male
brackets on the bottom of the bassinet line up with the female brackets on the stroller frame.
• Push down on both sides of the bassinet until both brackets snap into place. (8) Pull up on the
bassinet on both sides to ensure it is secure.
• To remove the bassinet, push both round buttons on both sides of the bassinet and pull away from
the stroller. (9)
• To use the bassinet in the front position, front adapters (sold separately) must be installed prior to
installing the bassinet.
• Remove the two safety caps from the lower frame mount points by pressing the release button
and pulling each cap off. (10) Store the safety caps in a safe place for future use.
• Insert one front adapter into one of the mounting slots until it clicks into place. Repeat for the other
side. (11) The front adapters can only be used in this position.
• Place the bassinet on the front adapters so that the male brackets on the bottom of the bassinet
line up with the female brackets on the front adapters.
• Push down on both sides of the bassinet until both brackets snap into place. (12) Pull up on the
bassinet on both sides to ensure it is secure.
• Install safety caps on the holes of both slots when using the stroller without the front adapters.
• To disassemble the bassinet, remove the mattress, and unfasten the Velcro at the bottom of the
bassinet. With one hand braced against the bottom of the bassinet, use your free hand to firmly
pull on the loops attached to the brackets until it disconnects from the grooves and lies down flat.
(13) Repeat for the other side. The bassinet should now lie flat for storage.
• The mattress fabric is washable. Remove the fabric from the foam pad and place the fabric into a
mesh washing bag when washing.
• Before folding, remove the bassinet.