Joovy Caboose S, Instruction Manual

Page: 5 / 44

5
Assembly and Usage
• To use the car seat adapter in the front position, first ensure the front seat is removed.
• Line up the male brackets on the bottom of the car seat adapter with the female brackets on the
stroller frame. (1)
• Push down on both sides of the car seat adapter until both brackets click into place. (2) Pull up the
car seat adapter on both sides to ensure it is secured.
• The car seat can only face backward.
• Hold the car seat by the carry handle and lower the car seat onto the stroller so that the hook on
the rear of the car seat latches onto the car seat adapter. Pull up on car seat to ensure it is secure.
• To remove the car seat, pull the release lever (the same lever used to release the car seat from its
base) and lift up. (3)
• To remove the car seat adapter from the stroller, push the trigger on both side and pull it up off the
stroller. (4)
• To use the car seat adapter in the rear position, ensure the front seat is fully upright.
• Line up the male brackets on the bottom of the car seat adapter with the female brackets on the
stroller frame. (5)
• Push down on both sides of the infant car seat adapter until both brackets click into place. Pull up
on the infant car seat adapter on both sides to ensure it is secured. (6)
• The car seat can only face backward.
• Hold the car seat by the carry handle and lower the car seat onto the stroller so that the hook on
the rear of the car seat latches onto the car seat adapter. (7) Pull up on car seat to ensure it is
secure.
• To remove the car seat, pull the release lever (the same lever used to release the car seat from its
base) and lift up.
• To remove the adapter from the stroller, press the trigger on both sides. Pull up and remove. (8)
NOTE: The stroller can be folded with the car seat adapter installed in front position or rear
position when bench seat is not installed.