1.Visual Check:
Check for scratches or damage on the
inner tube and excessive oil leakage from
the front fork.
2.Operation Check:
Place the scooter on a level place.
a. Hold the scooter in an upright position
and apply the front brake.
b. Push down hard on the handlebars
several times and check if the fork
rebounds smoothly.
- 29-
dealer.
STEERING INSPECTION
Periodically inspect the condition of the
steering. Worn out or loose steering
bearings may be dangerous. Place a stand
under the engine to raise the front wheel
off the ground Hold the lower end of the
front forks and try to move them forward
and backward. If any free play can be felt,
ask a dealer to inspect and adjust the
steering. Inspection is easier if the front
wheel is removed.
!!!WARNING:
Securely support the scooter so there is no
danger of falling over.
- 30-
WHEEL BEARINGS
If there is play in the front or rear wheel
hub or if the wheel does not turn
smoothly, have a dealer inspect the wheel
bearings.
FUSE REPLACEMENT
If the fuse is blown, turn off the main
switch and the switch of the circuit in
question. Remove the screws on battery
case cover the fuse is at the side of the
case. Install a new fuse of specified
amperage. Make sure the new fuse is
fitted securely. Turn on the switches and
CLEANING & STORAGE
A.CLEANING
Frequent, thorough cleaning of your scooter
will not only enhance its appearance but will
also improve its general performance and
extend the useful life of many components.
1.Before cleaning the scooter:
a. Block off the end of the exhaust pipe to
