DHBWI-316 www.jonti-craft.com/kydzsuite
|
800.543.4149
Page 9
5. Your Panels should look similar to this
after they have been connected with the
Hub. NOTE: a Hub can be attached to
more than two items at a time (i.e., two
Panels and two Stabilizer Wings).
Assembling Panels
1. Unscrew the top cap of
the KYDZ Suite Hub
and remove plastic
connector block and
set aside.
2. Slide the Hub Connector Tab
on the bottom of the first
Panel into a groove in the
bottom connector block.
3. Slide the Hub Connector
Tab on the second Panel
into a groove in the bottom
connector block at desired
angle.
top cap
Hub Connector
Tab
connector
block
bottom connector
block
4. Replace the top connector block by
aligning the Hub Connector Tabs on
the two Panels with the grooves and
the post with the connector block
Screw in the top cap until tight.
top cap
top connector
block