English
– 15
WORKING TECHNIQUES
•
Always wear heavy-duty gloves when repairing the cutting
attachment. This is extremely sharp and can easily cause
cuts.
•
Store the machine out of reach of children.
•
Use only original spare parts for repairs.
Basic working techniques
•
Work with a swinging action from the bottom upwards
when trimming sides.
•
Adjust the throttle setting to suit the load.
•
When trimming a hedge the engine should always face
away from the hedge.
•
Hold the machine as close to your body as possible to get
the best balance.
•
Make sure that the tip does not touch the ground.
•
Do not rush the work, but work steadily until all the
branches have been cut back cleanly.
Changing the hedge trimmer angle
•
Undo the knob.
•
Adjust the angle with the help of the handle on the cutting
unit.
•
Tighten the knob.
Transport position
Once the work has been completed fold the cutting unit back
against the shaft to simplify transport and storage of the
hedge trimmer.
1
Turn off the engine.
2
Undo the knob.
!
WARNING! Do not hold the cutting head
when you adjust the angle. The blades are
sharp and you could easily cut yourself.
Summary of Contents for HTE2123
Page 23: ......
Page 24: ...z Td 6o 2009 11 17 z Td 6o 1152683 26 Original instructions...
