Jonsered GT 2128CD, Operator'S Manual

Page: 8 / 40

C Contents
INTRODUCTION............................................................ 8
SAFETY..........................................................................9
ASSEMBLY.................................................................. 11
OPERATION.................................................................12
MAINTENANCE............................................................13
TECHNICAL DATA.......................................................15
ACCESSORIES............................................................16
EMISSION CONTROL WARRANTY STATEMENT..... 16
INTRODUCTION
Operator's manual
The initial language of this operator's manual is English.
Operator's manuals in other languages are translations
from English.
Overview
(Fig. 1 )
1. Trimmer head
2. Grease filler cap
3. Bevel gear
4. Cutting attachment guard
5. Shaft
6. Shaft coupling
7. Loop handle
8. Throttle trigger
9. Stop switch
10. Throttle trigger lockout
11. Spark plug cap, spark plug
12. Starter housing
13. Starter rope handle
14. Fuel tank
15. Primer bulb
16. Choke control
17. Air filter cover
18. Drive disc
19. Operator’s manual
Chemical warning
(Fig. 2 )
Symbols on the product
(Fig. 3 ) Warning
(Fig. 4 ) Read this manual.
(Fig. 5 ) Use approved head protection.
(Fig. 6 ) Use approved hearing protection.
(Fig. 7 ) Use approved eye protection.
(Fig. 8 ) Use approved protective gloves.
(Fig. 9 ) Use protective shoes/boots.
(Fig. 10 )
The product can cause objects to eject,
which can cause damage to the eyes.
(Fig. 11 )
The product can cause objects to eject,
which can cause damage to the eyes.
(Fig. 12 ) Max. speed of the output shaft.
(Fig. 13 ) Safe distance
(Fig. 14 )
Only use an approved trimmer line. Do not
use a blade.
(Fig. 15 )
Do not use a cutting attachment made of
metal.
(Fig. 16 )
Make sure that long hair is put up above
your shoulders.
(Fig. 17 )
The arrows show the limits for the position of
the handle.
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
8 460 - 001 - 03.11.2017