4 Function test
4.1 To do a check of the safety system
The engine can only be started when the conditions are
met as follows:
•
The cutting deck is lifted and the parking brake is
applied.
The engine must stop in the situations that follow:
•
The cutting deck is lowered and the operator lifts
from the seat.
•
The cutting deck is lifted, the parking brake is not
applied and the operator lifts from the seat.
To do a check of the safety circuit, try to start the engine
with one of the conditions above not met. Change the
conditions and try again.
4.2 Seat safety switch
The seat safety switch starts the safety circuit when the
operator lifts from the seat. The engine and the drive to
the blades stop if the blades are engaged or the parking
brake is not applied. See also
assemble the seat microswitch on page 27.
659 - 001 - 11.04.2018
Function test - 9
