Jonsered CS 2258, Operator'S Manual

Page: 39 / 44

English – 39
TECHNICAL DATA
EC-declaration of conformity
(Applies to Europe only)
Husqvarna AB , SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service Jonsered CS 225 8 , CS 2260 and CS 2260WH from 2011’s serial numbers and onwards (the
year is clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the
requirements of the COUNCIL’S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 ”relating to electromagnetic compatibility” 2004/10 8 /EC .
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC .
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100-2/A1:2009, CISPR 12:2007, EN ISO 116 8 1-1:200 8 .
Notified body: 0404, SMP Svensk Maskinprovning AB , Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive’s (2006/42/EC) article 12, point 3b. The certificates
for EC type examination in accordance with annex VI, have the numbers:
0404/11/2322 – CS 2258, 0404/11/2323 – CS
2260, CS 2260WH.
Notified body: 0404, SMP Svensk Maskinprovning AB , Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive’s (2006/42/EC) article 12, point 3b. The certificates
for EC type examination in accordance with annex VI, have the numbers:
0404/11/2322 – CS 2258, 0404/11/2323 – CS
2260, CS 2260WH.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 28 October 2011
Bengt Frögelius, Development director chainsaw R&D (Authorized representative for Husqvarna AB and responsible for
technical documentation.)