34
– English
334T
2,15/35,2
1,50/38
1,22/31
2 800
1,5/9 600
SEM
CD
NGK BPMR 7A
Champion RCJ 7Y
0,02"/0,5
ZAMA
C1Q-EL19
0,63/0,3
3-7
0,34/0,16
Automatic
7,7/3,5
14"/34
12"-16"/30-41
11"-13"/28-33
18,3
3/8"
0,050"/1,3
6
TECHNICAL DATA
Engine
Cylinder volume, cu.in/cm
3
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Power, kW/ rpm
Ignition system
Manufacture
Type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication
system
Manufacturer
Carburetor type
Fuel capacity, US pint/litre
Oil pump capacity at
8 500 rpm, ml/min
Oil capacity, US pint/litre
Type of oil pump
Weight
Without bar and chain,
Lbs/kg
Chain/bar
Standard bar length,
inches/cm
Recommended bar
lengths, inches/cm
Usable cutting length,
inches/cm
Chain speed at max.
power, m/sec
Pitch, inch
Thickness of drive link,
inch/mm
Number of teeth on drive
sprocket
Guide bar
Saw chain
Length
Pitch
Max nose
inch
inch
radius
Husqvarna 334T
12
3/8
7T
Husqvarna S36 or Oregon 91VG
14
3/8
7T
16
3/8
7T
Husqvarna 338XPT
12
3/8
9T
Husqvarna S36 or Oregon 91VG
14
3/8
9T
16
3/8
9T
Type
Inch
Inch/mm
Inch/mm
Angle
Angle
Angle
Inch/mm
Inch/cm: dl
S36
3/8"
0,050"/1,3
5/32" /4,5
60°
30°
0°
0,025"/0,65
12"/30:45 14"/34:52
16"/41:56
91VG
3/8"
0,050"/1,3
5/32" /4,5
60°
30°
0°
0,025"/0,65
12"/30:45 14"/34:52
16"/41:56
1
5
L
338XPT
2,4/39
1,6/40
1,22/31
2 800
1,7/9 600
SEM
CD
NGK BPMR 7A
Champion RCJ 7Y
0,02"/0,5
ZAMA
C1Q-EL19
0,63/0,3
3-7
0,34/0,16
Automatic
7,7/3,5
14"/34
12"-16"/30-41
11"-15"/28-38
18,3
3/8"
0,050"/1,3
6
The following is a list of recommended cutting equipment
for Class 1A and 1B Chainsaws.
The combinations of powerhead, bar and chain meet all
requirements outlined in the CSA Z62.1-95 Chainsaws and
Z62.3-96 Chainsaw Kickback standards.
The guide bar nose radius is determined by either the
maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you
may use a guide bar with smaller nose radius than in our
list. For guide bars of the same length, all sprocket-nose
guide bars of the same pitch and having the same number
of sprocket teeth may be considered to have equivalent
kickback energy.
A hard nose bar having the same length and nose radius
as a sprocket-nose bar may be considered to have
equivalent or less kickback energy than the sprocket-nose
bar.
We recommend that you as replacement use the listed bars
and chains or ”Type C Low-Kickback Saw Chains” which
are available at your dealer.
RECOMMENDED CUTTING EQUIPMENT
FOR CANADA
