Warning:
If one of the buttons, marked with letters R, G, B, is pressed and held for more than 5 seconds, the colors will
reverse (re-programming). To restore the colors, press another one from buttons marked with R, G, B letters
and hold it for 5 seconds.
Light intensity adjustment
You can darken or lighten every colour. If you want to have a darker shade, press the button as many times
until you reach the desired level. If you want to have a lighter shade, analogical push the button .
Color change programs
If you want the colours to change each other without pushing the buttons for every of them, we encourage you
to try 4 automatic colour change programs. The programs have separate buttons on the right side of the
remote control (the programs can be switched):
•
FLASH. Jumpy change of colours.
•
STROBE. Fade in & fade out.
•
FADE. Colours devolve evenly from one to another.
•
SMOOTH. Changing main 3 colours
–
red, green and blue.
s
Color change frequency
When you choose one of the automatic colour change programs (FLASH, STROBE, FADE, SMOOTH), you also
get the possibility to control colour change frequency. If you want the colours to change faster, push the button
as many times to reach the desired speed. If you want the colours to change slower, analogical push the
button .
REMARK: when you choose automatic colour change program, the button and regulate only colour change
frequency, function of darken
–
lighten is not available at that moment.
Drawing on the Magic light sandbox
After choosing desired colour or automatic colour program, take a bowl with crumbly material, e.g. semolina (~
700 g), and pour it in a thin layer on a shining glass. Start to draw! You can do it with:
your fingers,
various brushes and sticks
blowing air through straw
making the imprints with your palms or foots
pouring the sand stream through your fingers and
etc.
Warning:
We recommend, as a crumbly material, to use what you have at home
–
various groats, rise, cornflour and
similar. Important, that the material would be clean & not dangerous and the children can play only supervised
by adults.
By drawing you can create not only separate images, but also the stories. Enliven them by using various toys,
sea shells, cones, etc. in this way building up your own 3D model.
Afte
r you have finished using ML table, point the remote control eye (it is at the top of the remote) to the center of
ML table and push the button OFF. Then disconnect adapter (B) from electric power source (D) and the ML
table (A). Remove toys, wipe groats (or other used material) to the bowl and stand the Magic light sandbox to
the place, appointed for it.