Dsh4 – User Manual
Ver. 1.0 (Dsh4_Deep_Purple.hex)
23
Jam Mode
4.3.
Pressing simultaneously switches D & E (factory setting), or through the definition of a function in a switch, you can set Jam mode.
In this mode you have direct access to the activation / deactivation of the Loops for each switch.
After Jam mode is selected, loops activated in current bank will lit. To toggle on a loop you must press its respective switch,
labelled in orange, below the switch.
Next table shows functions associated to each switch:
Jam Mode
A,B,C,D,E,F,G,H
Toggle On / Off Switch
D+E
Toggle Jam Mode / Bank Mode
F+G
Exit Jam Mode
G+H
Save current loops combination into selected bank
Summary of Contents for Dsh4
Page 1: ...Dsh4 User Manual...
