3.1.6 Stack no more than 2 layers
3.2 Unloading Instructions
3.2.1
3.4
Storge
3.3 Secondary Transportation
and Precautions
3.3.1
3.2.2
3.3.2
2
6
Jolywood (Taizhou) Solar Technology Co.,Ltd.
Kaiyang Rd., Jiangyan Economic Development zone, Taizhou City, Jiangsu Province, P. R. China
www.jolywood.cn
+86-523-8061 2361
Installation Manual
- Jolywood N-type Mono-crystalline Double Glass Module
When unloading modules from vehicle, less than
2 lots package could be lifted each time with a
reasonable fixture. Before lifting, ensure that the
trays and cartons undamaged, the hoisting ropes
are durable. When the hoisting is near the ground,
two men put carton gently on a relative flat
position. Using a forklift to remove modules from
the truck, unloaded modules should be placed on
a level surface. The depth of forklift forks into the
pallet shall not be less than 3/4 of the pallet
length.
When modules is temporarily stored in a project
site, modules should be placed in a dry and
ventilated place. Do not stack modules at a
project site. Cover modules with a tarpaulin, the
tarpaulin should be fixed by a curtain or mesh belt
to protect modules from moisture and rain.
Please store the modules in a dry and ventilated
environment and place the modules on a
relatively flat ground to avoid package damage or
dumping due to ground deformation or collapse.
Storage
requirements:
humidity
<85%,
temperature range -40 ℃ -50 ℃.
If the modules need long-distance transportation
or long-term storage, do not remove the original
packaging, and keep the wrapping film and
packaging carton intact.
If the module would be transported for a too long
distance or stored for a long period, it is forbidden
to remove the original package. Modules
packaged with original package could be
transported by land, sea or air. During
transportation, fixing the package to the transport
platform to ensure it would not be tumbled.
Taking land transportation as an example. When
transported with truck, stacking up should be less
than two layers, it is forbidden to cut the
packaging belts of packages. There shall be no
gap between pallets or between pallets and truck
supports. If there is a gap, it must be filled with
fillers (inflatable bags, etc.) to prevent modules
from tilting and shaking during transportation.
It is forbidden to remove the original package
when modules transported at a project site. One
pallet transported each time is required. During
transportation, fixing package to the transport
platform to ensure that the package would not be
tumbled. Do not use tricycle to transport
modules. Do not handle modules with rope
during transportation, and it is forbidden to carry
or drag modules through the wires or junction box
of the modules.
