6
Physical description Parent Unit
1.
Power button
2.
Micro USB port
3.
3.5mm audio output
4.
Volume control buttons
5.
Reset button
6.
Antenna
7.
Table stand
8.
Microphone
1.1.
Setup Parent Unit
Power adapter
1.
Connect the power adapter to the MicroUSB input on the side of the parent unit.
2.
Insert the adapter into a 230V wall socket.
Only use the supplied power adapter.
Make sure nobody can trip or fall over the adapter cable. You can bundle cables that are too long with tape or cables ties
available specifically for this purpose.
Charging
The battery will be charged as soon as you connect the power adapter and insert it into a 230V wall socket.
• For initial use, charge the battery for at least 15 hours, even if
the indicator shows a fully charged battery.