SAFETY WARNINGS
- Use the tool only from the ground in safety conditions
- Wear protective equipment suitable for the operations to be carried out; wear protective goggles and check that the
clothing is tight to the body. Avoid wearing ties, necklaces, belts or long, uncollected hair that could get caught up or
slip between moving organisms.
- Use shoes with non-slip soles and gloves
- Obligation to wear noise protection headphones.
- A person under the influence of alcohol or taking drugs that reduce the readiness of reflexes or drugs is not allowed to
move or command the apparatus, nor to perform maintenance or repair operations on it.
- Only entrust the tool to persons who are familiar with the instructions for use or trained by authorized persons.
- Keep the tool away from children and animals.
- It is forbidden to tamper with the safety devices.
- The User is responsible for dangers or accidents to other people or their property.
- Do not use the tool when you are in precarious balance.
- It is forbidden for the operator to use the tool by operating on a ladder.
- Use the tool only for the collection of olives, coffee, almonds, pistachios.
SAFETY IN MAINTENANCE
- Before carrying out any maintenance on the machine, make sure that the power supply is disconnected.
- Maintenance operations must always be carried out by qualified personnel for these specific functions.
- At the end of the maintenance and repair operations, before restarting the machine, the technical manager must ensure
that the works are completed, the safety devices restored and that the protections have been re-installed.
- During the maintenance or repair operations it is mandatory to use suitable protective clothing such as:
Gloves
Helmet
Hearing protection
deviles
Non-slip shoes and anticrushing
DISPOSAL OF THE MACHINE
Disconnect the machine from the power supply and cut the connecting cable.
The machine consists of materials that can be recovered.
Deliver your discharged machine to an official material recycling center.
Disposal must however be carried out in compliance with the laws in force.
DECLARATION OF CE CONFORMITY
JOLLY ITALIA S.r.l.
Declares that the machine: Model V50
harvester
Conforms to the European Directives:
2006/42 / CE
2004/108 / EC
It has been manufactured in compliance with the following standard and standardized documents:
EN 60204-1 (2006) + A1 (2009)
EN 12100-1 (2003) EN 12100-2 (2003)
EN 55014-1 (2008) + A1 (2010)
EN 55014-2 (1998) + A1 (2001) + A2 (2008)
The technical documentation according to 2006/42 / EC is available at:
JOLLY ITALIA - Via Mattei 10 - 60013 CORINALDO (AN) - ITALY
JOLLY ITALIA S.r.l.
(Ceccacci Giuliano)
Corinaldo, 17/08/2018