Jolly LP-H400, User Manual, Page: 9 / 18

The projector can be placed directly on the stage floor or rigged in any orientation on atruss without alte-
ring its operation characteristics.
For overhead use,always install a safety-rope that can hold at least 10 times the weight of the fixture.You
must only use safety-ropes with screw on carabines.Pull the safety-rope through the two apertures on the
bottom of the base and over the trussing system etc.
1
2
1
2
3
P
o
w
e
r i
n
- 5 -
Warning
: it is necessary to make sure that
the installation location is perfectly appropriate,
and the installation location is safe and reliable.
Warning
: The maximum connecting is
less than 4 pcs to make sure the normal life
time of the lighting fixture
.
4.3 Power supply connection and cut off
Connect the light source to the main power source with the plug of the power cord, or cut off the power
supply:
Connection: according to procedures, the power plug and socket is inserted into
the groove one one alignment,rotation.
Cut off:according to procedures,press the button on the rotating plug,pull out.
L
N
CABLE(EU) CABLE(US)
Pin
Brown Black Live
Yellow/Green Green Earth
Light blue
White Neutral
INTERNATIONAL
4.4 Power Connection
mains with the enclosed power cable and plug.
If you wish to change the power supply settings, see the chapter appendix Connect the fixture to the