manualshive.com logo in svg

Jolly Mec EKO Plus, Installation, Use And Maintenance Manual, Page: 28 / 44

Share
Download
Jolly Mec EKO Plus Installation, Use And Maintenance Manual Download Page 28

28

Menu 10

XXX
YYY

3

4

6

1

2

Menu 10

XXX = SET

YYY =ADJUST-

Menu to adjust the load PELLET settings and combustion fan 

speed
ADJUSTMENT SETTINGS:

1.  button 4, press button 6 to reach the SET ADJUST- page, press 

button 4 to confirm

2.  on page 1, ADJUST PELLET, press button 4 to enter, then press button 1 or 2 to increase or decrease the PELLET load

3.  press button 6 to go to the ADJUST CHIMNEY page

4. 

press button 4 to confirm and enter, press button 1 or 2 to adjust the value

5.  press button 3 to exit, press repeatedly to return to the home page

ADJUST PELLET: use this setting when there is a change in the type of pellet used during the first start-up, i.e. when the Assistance 

Technician calibrated the operational settings. This value should be increased if the pellets are much smaller than the previous version 

or has a lower heat efficiency, and vice versa.

ADJUST CHIMNEY: use this setting when the draught conditions change. Increase in cases of weak draught and vice versa.

WARNING:

Jolly-Mec declines all liability regarding incorrect adjustments and setting that could cause the stove to malfunction.

Menu 08

XXX
YYY

5

3

4

6

Menu 08

XXX = STATE

YYY = STOVE

Menu 8 consists of various pages that display information on 

the stove conditions.
VIEWING STOVE STATUS:

1.  button 4, press button 6 to reach the STATE STOVE page, 

press button 4 to confirm.

2. 

the first page displays:

 

a. fume temperature, first row

 

b. fume fan speed and output level, second row

 

c. pellet load, third row

 

d. phase in progress, fourth row

3.  press button 6 to change page

4.  information for the assistance technician is provided from page 2 to page 8. Press Button 5 to go to page 8.

5.  press button 

3

 to exit, press repeatedly to return to the home page.

Menu 09

XXX = TECHNIC

YYY = SETTINGS

Password protected Menu reserved to the specialised Technical 

Service Center. 

Menu 09

XXX
YYY

Summary of Contents for EKO Plus













































Reviews:

No comments