TP830 User's Manual
- 50 -
ESC \
Set relative print position
Format: ASCII:
ESC \ nL nH
Decimal: 27 92 nL nH
Hex:
1B 5C nL nH
Description:
Set the print position at (nL+nH*256)* (horizontal or vertical minimal unit) inches from current position;
nL, nH=0~255. Horizontal or vertical minimal unit is specified by GS P command.
ESC a n
Select justification
Format: ASCII: ESC
a n
Decimal: 27 97 n
Hex: 1B 61 n
Description:
n=0, 48: Left justification; n=1, 49: centering; n=2, 50; right justification.
ESC c 3
Select paper out sensor
Format: ASCII:
ESC c 3 n
Decimal: 27 99 51 n
Hex:
1B 63 33 n
Description:
n=xxxxxxx1B, xxxxxx1xB, xxxxxx11B, Paper near end sensor takes effect.
n=xxxxx1xxB, xxxx1xxxB, xxxx11xxB, Paper out sensor takes effect.
ESC c 4
Select paper sensor to stop printing
Format: ASCII: ESC c
4 n
Decimal: 27
99 52 n
Hex: 1B
63 34 n
Description:
n=xxxxxxx1B, xxxxxx1xB, xxxxxx11B; Paper near end, printer stops printing.
n=xxxxx1xxB, xxxx1xxxB, xxxx11xxB; Paper out, printer stops printing.
ESC c 5
Enable/disable panel key
Format: ASCII: ESC
c
5
n
Decimal: 27 99 53
n
Hex: 1B 63 35
n
Description:
When the last bit of n is 0, enable
FEED
key to take effect.
When the last bit of n is 1, disable
FEED
key to take effect.
ESC d
Print and feed n lines
Format: ASCII: ESC
c
n
Decimal: 27 100 n
Hex: 1B 64 n
Description:
Print the data in input buffer and feed n lines, n= 0~255.
