TP820 User’s Manual
- 22 -
Chapter 4 Installing and Replacing the Roll Paper
The printer can install the paper conveniently, which should be 80mm wide. How to deal with the
paper will be explained in details in this chapter
4.1 Paper Installation Steps
1. Push the cover open lever, open the cover.
2. Insert the paper roll as shown below (Be sure to note the correct direction that the paper comes
off the roll).
Note: Paper head should be pulled out by the direction of paper-input slot, but not the
opposite.
3. Pull out a small amount of paper as shown in Fig 4-3.
1. Don’t touch the thermal head after printing to avoid being burned.
2. Don’t pull the paper moving directly with your hand.
！
Note
Fig 4-2 Insert the paper roll
Fig 4-1 Open the cover
Upper Cover
Error
Correct
Paper Roll
