9
10
12
15
14
16
Installation with 3-point-belt
11
!
To ensure the correct head
support height is obtained,
the bottom of the headrest
MUST be even with the top of
child’s shoulders as shown in
14
and the shoulder belt
must be positioned in the red
zone as shown in
15
.
!
Place a booster seat firmly
against the back of a
forward-facing vehicle seat
equipped with a lap/shoulder
belt.
!
Have your child sit in a
booster seat with their back
flat against back of a booster
seat.
!
NOT as shown in
17
. Fasten
buckle and pull up on the
shoulder belt to tighten.
!
If the belt lays across child
neck, head or face, readjust
head support height.
!
Belt must not be twisted.
Please make sure that the backrest of the child safety seat
rests flat against the backrest of the car seat so that the child
seat is under no circumstances in a reclined position.
12
Pull
the vehicle safety belt and pass through the belt path
13
, and
then buckle it up.
13
-3
!
Position shoulder belt through the shoulder belt guide
shown in
13
-1
!
DO NOT position vehicle belt over top of the armrests. It
must pass underneath the armrests.
13
-2
!
The lap belt must be low down on hips. The booster is
shown as
13
!
The booster seat can not be used if the vehicle safety
belt buckle (female buckle end) is too long to anchor the
booster seat securely.
13
-4
see images
11
-
17
13
3
1
2
4
17
