11
12
!
Pushchair designed to be used from birth shall recom-
mend the use of the most reclined position for new born
babies.
!
For infant child restraints used in conjunction with a
chassis, this vehicle does not replace a cot or a bed.
Should your child need to sleep, then it should be
placed in a suitable pram body, cot, or bed.
!
The parking device shall be engaged when placing and
removing the children.
!
Extra Care is needed if used on moving vehicles and
child should not be left unattended, even with brakes
engaged.
Stroller Assembly
Please read all the instructions in this manual before assembling and using this product.
Open Stroller
see images
2
Push secondary lock
2
- 1
and squeeze one-hand-fold button.
2
- 2
Meanwhile, pull the stroller backward to
open. Latches should click into place.
!
Check that the stroller is completely open before continuing to use.
Assemble & Detach Front Wheels
see images
3
Assemble front wheels to front legs. Check that wheels are securely attached by pulling on wheel assemblies.
3
The front wheels can be disassembled by pressing the snap buttons.
Assemble & Detach Storage Basket
see images
4
-
8
Assemble storage basket, plese see images
4
-
5
. Detach storage basket, plese see images
6
-
8
The completely assembled stroller is shown as
9
.
Stroller Operation
Adjust Backrest Angle
see images
10
Recline Backrest
There are 4 angles for the backrest.
To recline the backrest, squeeze the recline handle on the back of the seat
10
- 1
, pull down on the backrest.
10
- 2
To raise the backrest, push up.
!
Make sure the recline is set properly for use.
Use Armbar
see images
11
The armbar can be pulled up on both left and right sides.
Press armbar release button
11
- 1
, and then pull up the armbar
11
- 2
. Align the armbar end with matching
component, and then push down to lock.
Tip
Armbar can be open for easy seating and unseating of child.
Use Buckle
see images
12
-
13
Release Buckle
Press the center button to release the buckle.
12
Lock Buckle
Match the waist belt buckle with the shoulder buckle
13
- 1
, and click into the center buckle.
13
- 2
A click
sound means the buckle is locked completely.
13
- 3
!
To avoid serious injury from falling or sliding out, always secure your child with harness.
!
Make sure your child is snugly secured. The space between the child and the shoulder harness is about the
thickness of one hand.
!
Do not cross the shoulder belts. This will cause pressure on child’s neck.
Use Shoulder & Waist Harnesses
see images
14
-
16
!
In order to protect your child from falling out, after your child is placed into the seat, check whether the
shoulder and waist harnesses are at proper height and length.
14
- 1
Shoulder
harness
anchor
A
14
- 2
Shoulder
harness
anchor
B
14
- 3
Slide adjuster
For larger child, use shoulder harness anchor A and the highest shoulder slots. For smaller child, use shoulder
harness anchor B and the lowest shoulder slots.
Use either shoulder harness anchor in the slots that are closest to child's shoulder height.
15
Use slide adjuster to change the harness length.
16
- 1
Press the button
16
- 2
, while pulling the waist harness to proper length.
16
- 3
Tip
For larger child, use the highest shoulder slots. For smaller child, use the lowest shoulder slots.
Adjust Calf Support
see images
17
-
18
