Jole gemm, Instruction Manual

Page: 21 / 23

37
3. You must remove the shoulder harnesses and shoulder
pads. To do this please refer to the section 'Shoulder
Harness Strap Height Adjustment'.
4. Pull out the fastening pieces underneath the edge of the
seat. (Fig. 37)
5. Detach the metal hook from the edge of the infant child
restraint, and then lift it up to seperate the seat pad from the
stroller fix release button. (Fig. 38)
6. Detach the seat pad from around the adjustment button as
shown in (Fig. 39)
To refit the seat pad simply reverse the steps above, however
make sure that the shoulder harnesses are not crossed over
and not twisted.
Care and Maintenance
!
After removing the foam of insert, please store it somewhere
that the child can not access it.
!
Please wash the soft goods with cold water under 30°C.
!
Do not iron the soft goods.
!
Do not bleach or dry clean the soft goods.
!
Do not use undiluted neutral detergent, gasoline or other
organic solvent to wash the infant child restraint or base. It
may cause damage to the infant child restraint.
!
Do not twist the soft goods to dry with great force. It may
leave the soft goods with wrinkles.
!
Please hang dry the soft goods in the shade.
!
Please remove the infant child restraint and base from the
vehicle seat if not in use for a long period of time. Put the
infant child restraint in a cool, dry place and somewhere your
child can not access it.
Note