INF
ANT MODE
INF
ANT MODE
i. Installation for Rearward-Facing Infant Mode
1. Remove infant body support.
!
Vehicle waist belt must pass underneath infant body support.
Reclining Adjustment
Squeeze the reclining adjustment handle
4
- 1
, and adjust the car seat to the proper position
4
- 2
.
The recline positions are shown in
5
.
There are three recline positions (1-3) for forward-facing Toddler mode and two recline positions (1-2) for
forward-facing Youth mode
5
. The recline position 4 is for rearward-facing Infant mode
5
.
Angle indication: with top and bottom triangles aligned
5
.
15
Height Adjustment
(for Head Support and Shoulder Harness Straps)
Please adjust the head support and shoulder harness straps to the proper height according to the child's
height.
!
When used in rearward-facing Infant mode, the shoulder harness slots must be even with or just
below the child's shoulders.
6
- 1
!
When used in forward-facing Toddler mode, the shoulder harness slots must be even with or just
above the child’s shoulders.
6
- 2
!
When used in forward-facing Youth mode, the shoulder belt guides must be even with or just
above the child’s shoulders.
6
- 3
If the shoulder harness straps are not at proper height, the child may be ejected from the car seat during
a crash.
Squeeze the head support adjustment handle
7
- 1
and pull up or push down the head support until it
snaps into one of the five positions.
The head support positions are shown in
7
.
Infant Mode
(for Child under 18kg / Newborn - 4 years old)
Reference age
Newborn -4 years old
Seat position
Position 4 (with top triangle and blue triangle aligned, as shown in
5
).
!
Please install the car seat on the vehicle seat first, and then place the child in the car seat.
1. First adjust the car seat to recline Position 4. Angle indication: With top triangle and blue triangle
aligned
5
. Please refer to
Page 13
(Reclining Adjustment).
2. Make sure the shoulder harness straps are adjusted to the proper height before installing this car
seat. Please refer to
Page 13
(Height Adjustment for Head Support and Shoulder Harness Straps).
3. When installing and adjusting the vehicle belts, make sure that both the vehicle shoulder belt and the
vehicle waist belt are not twisted or the belts may not function properly.
Note
16
2. Pass the vehicle waist belt
8
- 1
through the vehicle waist belt slots and then engage the vehicle
buckle tongue into the buckle
9
.
3. Install the vehicle shoulder belt
8
- 2
in the two rear-facing vehicle shoulder belt slots at the back of
the seat shell
10
.
!
Vehicle shoulder belt must pass through the rear-facing vehicle shoulder belt slots.
4. While pressing the car seat down firmly into the vehicle seat
11
- 1
, pull the vehicle shoulder belt to
fasten the car seat tightly and securely
11
- 2
.
!
Please check if car seat is installed tightly by moving the car seat back and forth at the vehicle
belt path. Please reference vehicle owner's manual for more information.
(Car Seat should not move more than 25mm/1").
Correctly assembled vehicle belt is shown in
12
.
!
Vehicle waist belt passes through the vehicle waist belt slots, as show in
12
- 1
.
!
Vehicle shoulder belt must pass through the rear-facing vehicle shoulder belt slots,
as shown in
12
- 2
.
!
The vehicle buckle tongue is engaged with the buckle correctly, as shown in
12
- 3
.
ii. Securing your Child in the Car Seat
1. Pull up the webbing lock
13
- 1
, while pulling out the shoulder harness straps to the proper
length.
13
- 2
2. Press the red button down to disengage the buckle.
14
3. Place the infant body support in the car seat, and then leave the harness straps on the left and right
sides of the car seat.
15
4. Place the child in the car seat and pass both arms through the harness straps.
16
!
After the child is seated, double check whether the shoulder harness straps are at the proper
height. Please refer to Page 13 (Height Adjustment for Head Support and Shoulder
Harness Straps).
5. Engage the buckle.
17
6. Pull down the adjustment webbing and adjust the harness so that your child is snugly secured.
18
!
Make sure the space between the child and the shoulder harness strap is about the thickness of
one hand.
18
Note
1. Infant body support is for child's protection. Child 0-6 months must use infant body support.
2. Please install the car seat on the vehicle seat, and then place the child in the car seat.
3. After the child is placed into the car seat, check whether the shoulder harness straps are at the
proper height. Please refer to
Page 13
(Height Adjustment for Head Support and Shoulder
Harness Straps).
