background image

ENGLISH

8

HULL IDENTIFICATION NUMBER PLATES ISO 10087 (C.I.N.)

There are two hull identification number plates aboard.

One is fitted to the right of the stern mirror at least 300 mm from

the boat axle.The second plate is resined into a concealed point on

the boat of which only the manufacturer knows the whereabouts.

T

HE PLATES MUST NEVER BE MOVED OR TAMPERED WITH

.

The C.I.N. identifies the following:

- Manufacturer Nationality

ITALIA

........................

- Manufacturer Code

JBO 

.........................

- Serial Number

.....................................

- Month of Construction

.....................................

- Year of Construction

.....................................

- Year of Sale or Use

.....................................

It is fundamental for these number plates to be

present aboard the boat as they are the only form of recognition

and identification for it and without them the craft is not compliant

with current legislation.The plates should never be removed, so

any tampering or removal not authorised by the boat builder is the

full responsibility of the owner.

ATTENTION

I T  -   J  B  O

Summary of Contents for Clubman 24
































































Reviews: