Verstellung
Schleifbandhalter
feststellen
lösen
secure
loosen
adjustment
grinding belt holder
Adjustment of the grinding belt position
In order to obtain the optimum working position with the drive belt in each respective case, the grin-
ding belt holder can be pivoted around the drive axle.
1. Loosen screw with an Allen key.
2. Pivot the grinding belt holder into the desired position.
3. Tighten the screw.
Tighten the screw firmly! If the screw is not firmly tightened, the grinding belt holder may change
position during work and cause injuries.
Examples of applications
Processing radius: In this case, the grinding belt runs in the direction indicated and grinds between
the tensioning roller and support roller.
Processing surfaces: The grinding belt runs in the direction indicated and works with the area in
which the belt is guided flat.
06
(Symbolic drawing)
Figure 5.4
(Symbolic drawing)
Figure 5.5
(Symbolic drawing)
Figure 5.6
Caution
